POLYURETHANE SYSTEMS
SPRAY POLYURETHANE FOAM SYSTEMS
They are polyurethane systems applied by spraying method. This product is applied with a spray polyurethane machine operating at high pressure. Making it in the form of a mobile application provides the advantage of application in all kinds of construction sites and high buildings. Thanks to spraying and on-site application, it takes the shape of the applied surface and provides the opportunity to be applied on all kinds of surfaces.
Features:
-
B1, B2 and B3 non-flammability classes
-
Excellent thermal insulation
-
Superior adhesion and mechanical properties
-
Choice of application density between 15-600 kg / m3
-
Environmentally friendly inflating gas
-
Fast reaction profile without flowing
Usage places:
-
Building interior and exterior insulation
-
Cold room insulation
-
Roof top, attic and roof floor insulation
-
Reverse ceiling insulation
-
Foundation curtain walls and floor insulation
-
Animal shelters and poultry farms isolation
Product types:
-
MONOFOAM - 25
-
MONOFOAM - 30
-
MONOFOAM - 35
-
MONOFOAM - 40
Technical Data Sheets:
REFRIGERATOR AND COOLING SYSTEMS
They are polyurethane systems applied by molding method. They are polyurethane systems used in the production of household refrigerators, freezers, minibars, industrial coolers and freezer cabinets. Thanks to its excellent adhesion performance, there is no need to use an extra adhesive for adhesion to metal.
Features:
-
It is generally used at a density of 38-42 kg / m3.
-
Since it does not produce bacteria and is suitable for food contact, it is especially suitable for the insulation of food stores.
Usage places:
-
Household refrigerators
-
Industrial type refrigerators and cooling departments
-
Deep freezers
-
Mini bar
-
Thermos
-
Soft drink cabinets
Product Types:
-
MONOFOAM - 25
-
MONOFOAM - 30
SOLAR ENERGY AND BOILER SYSTEMS
They are polyurethane systems applied by molding method. They are polyurethane systems used in the insulation of water tanks and boilers of solar energy systems. Thanks to its excellent adhesion performance, there is no need to use an extra adhesive for adhesion to metal. There are systems with different density or flammability class.
Features:
-
Generally, 35-45 kg / m3 density polyurethane system is used.
-
Since it does not produce bacteria and is suitable for food contact, it is especially suitable for the insulation of food stores.
Product types:
-
MONOFOAM - 30
-
MONOFOAM - 35
-
MONOFOAM - 40
PIPE AND TANK INSULATION SYSTEMS
They are polyurethane systems applied by injection method. These are polyurethane systems used in hot - cold water pipelines, tank insulations and geothermal pipelines. It can be applied by spraying spray machines and injection machines. It enables the production of geothermal pipes up to 12m in length.
Features:
-
Generally, production can be made at densities of 38-42 kg / m3 and in geothermal pipes 65 kg / m3.
-
Since it does not produce bacteria and is suitable for food contact, it is especially suitable for the insulation of food stores.
-
It can be used in pipe and tank insulation at -40 0C - (+) 130 0C.
Usage places:
-
Hot water line and tanks
-
In liquefied gas line and tanks
-
Steam transfer lines and tanks
-
In hot oil lines and boilers
-
In fire and clean water lines
-
In other chemical lines and tanks
Product types:
-
MONOFOAM - 35
-
MONOFOAM - 40
-
MONOFOAM - 45
COLD ROOM PANEL SYSTEMS
They are polyurethane systems applied by molding method. 12 m. These are polyurethane systems that allow the production of panels up to length and can be applied by injection from a single point. It is generally used in the insulation of cold storage rooms used for the storage of meat, fruit, vegetables and other food products.
Features:
-
Generally, panels can be produced in densities of 38-42 kg / m3 and 6-8-10-12-15 and 20 cm thicknesses depending on the desired storage temperature.
-
Depending on the machine capacity, our products can be produced with injection from a single point, even in panel production with a length of 12 m and a thickness of 20 cm.
Product types:
-
MONOFOAM - 30
-
MONOFOAM - 35
-
MONOFOAM - 40
FRIGO FRAME AND MODULAR CABIN SYSTEMS
They are polyurethane systems that can be used by injection or billet method. It is a polyurethane system used for the insulation of vehicles used in cold chain transportation. In the injection system, it is not necessary to use any adhesive to ensure the adhesion of the material to GRP or metal.
Features:
-
In injection applications, polyurethane with a density of 38-42 kg / m3 is generally used.
-
40-60 kg / m3 density polyurethane is used in billet applications.
-
Burning and splitting problems in billet, which are the biggest problems in billet applications, are not experienced in our products.
Usage places:
-
In vehicle bodies carrying vegetables and fruits
-
In vehicles carrying meat and dairy products,
-
In the guard and guard huts
-
In construction site buildings and temporary offices
Product types:
-
MONOFOAM - 30
-
MONOFOAM - 40
